Here is a quick tutorial of what I did. If you are left with questions, please message me, or email me and I will do my best to clarify.
The first thing you want to do is locate your tag. It will need to be on the bottom and the back. Lay your towel down and measure the top part of your towel. My towels had a clear band of stitching, at the top. Just above that, I measured the width and length. I then measured that same width and length for my fabric adding extra for a 1/4inch seam all the way around.
Notice just bellow my fabric is the stitching on the towel. I wanted to place my fabric directly above the stitching.
I first pinned and ironed my seam. I did a 1/4inch seam all the way around my fabric. Then I pinned my fabric to my towel.
Using a straight stitch, I sewed the fabric onto the towel.
Now time for the monogram! I used my word processor to print out the font I wanted for my monogram. It is best to use a bold font.
I used liquid stitch to hold the fabric monogram in place on the towel. I then used an applique stitch on my sewing machine and sewed the monogram onto the towel.
I chose to place my monogram at the opposite, top corner of my towel. That way when the towel wraps around the monogram shows.
Because towels need to hang up to dry, I decided they NEEDED an easy hang loop! Here is a quick how I did it picture.
The loop once pinned on (to the backside of the towel) should measure about 4". I folded my towel in half to find the exact center and pinned it on there. Using a straight stitch I sewed back and forth a few times just to reinforce the loop, since it will be holding the weight of the towel.
Are they not just lovely? It really is a simple project for a great result! Hope you have fun personalizing your towels!